BJSQG - MILL MORTAR; PATCHING MORTAR
- MSDS: BJSQG
- Manufacturer: NATIONAL REFRACTORIES AND MINERALS
- Product Name: MILL MORTAR; PATCHING MORTAR
- National Stock Number: 8030-00F013646
Product Identification
Product ID:MILL MORTAR; PATCHING MORTAR
MSDS Date:06/23/1989
FSC:8030
NIIN:00F013646
MSDS Number: BJSQG
Responsible Party
COLUMBIANA, OH 44408-9448
Emergency Phone: (216) 482-3841
Info Phone: (216) 482-3841
Cage: 4H756
Contractor
Telephone: 216-482-3841/415-462-1147
Cage: 4H756
Ingredients
SILICA, CRYSTALLINE - CRISTOBALITE
CAS: 14464-46-1
RTECS: VV7325000
Fraction By Weight: <10%
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.05 MG/M3 RDUST9293
SILICA, CRYSTALLINE - QUARTZ
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: <10%
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.1 MG/M3 RDUST;9293
ALPHA-ALUMINA (ALUMINUM OXIDE) (EPA LISTS ONLY FIBROUS
CAS: 1344-28-1
RTECS: BD1200000
Fraction By Weight: <5%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
GROG
CAS: 66402-68-4
Fraction By Weight: >50%
SILICATE BINDERS (SODIUM SILICATE)
CAS: 1344-09-8
Fraction By Weight: <25%
ACGIH TLV: 10 MG/CUM
Hazards
LD50 LC50 Mixture:ORAL RATS LD50 = 1153 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: LONG TERM EXPOSURE TO
RESPIRABLE SILICA MAY PRODUCE PNEUMOCONIOSIS IN SUSCEPTIBLE
PERSONS. SKIN: REPEATED OR PROLONGED CONTACT MAY CAUSE IRRITATION.
EYES: MAY IRRITATE OR INJURE.
Explanation of Carcinogenicity:RESEARCH ON CANCER HAS CATEGORIZED
CRYSTALLINE SILICA AS A CLASS 2A CARCINOGEN.
Effects of Overexposure:INHALATION: LONG TERM EXPOSURE TO RESPIRABLE
SILICA MAY PRODUCE PNEUMOCONIOSIS IN SUSCEPTIBLE PERSONS. SKIN:
REPEATED OR PROLONGED CONTACT MAY CAUSE IRRITATION. EYE: IRRITATE
OR INJURE.
Medical Cond Aggravated by Exposure:RESPIRATORY CONDITIONS
First Aid
First Aid:SKIN: WASH W/SOAP & WATER. EYES: IRRIGATE IMMEDIATELY
W/COPIOUS AMOUNTS OF WATER FOR 15 MINS. INHALATION: REMOVE TO FRESH
AIR. CONSULT PHYSICIAN IF NECESSARY.
Accidental Release
Spill Release Procedures:USE DUST FREE METHODS OF CLEANUPS.
Handling
Handling and Storage Precautions:TOXIC RISK MAY BE ALTERED BY CHEMICAL
OR PHYSICAL CHANGES CAUSED BY CONDITIONS OF USE. THIS PRODUCT IS A
GRANULAR REFRACTORY MIX.
Exposure Controls
Respiratory Protection:USE AN APPROVED RESPIRATOR IF DUST IS CREATED
DURING HANDLING, INSTALLATION OR TEAROUT.
Ventilation:LOCAL EXHAUST RECOMMENDED TO KEEP
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
Chemical Properties
Spec Gravity:1.5-2.5
Solubility in Water:<25%
Appearance and Odor:GRANULAR, WET; GREY
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:FINAL USED PRODUCT SHOULD BE TESTED TO DETERMINE
HAZARD STATUS & DISPOSED IN ACCORDANCE W/FEDERAL, STATE & LOCAL
LAWS & REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.